Shine- without water drops and streaks
The microfiber cleaning cloth is super thin, durable and thanks to its dense fibers
- it can clean without the use of chemicals- it is capable of absorbing large amounts of moisture, contamination and dust amounts that is capable of exceeding the cleaning cloths’ own weight. Soft to the touch, efficient for.
|
|
BATHROOM:
- cleans streak free and does not leave water drops behind
- outstanding moisture absorbing capabilities
- easy to clean |
|
KITCHEN:
- The cleaning cloth has 2 different sides, which can be used to
clean different surfaces: the fine textured side can be used
on shiny surfaces while the rougher side remarkably removes
stubborn stains |
|
GREASY SURFACES:
- due to the micro fiber’s special structure, it can efficiently
remove dust, grease and oil spots on dry surfaces without any
chemicals | |
The cleaning cloth’s size: 32x32 cm (3 pcs/package)
USAGE INSTRUCTION:
If possible avoid using cleaning products when cleaning with the micro fiber cleaning cloth. Cleaning substances (even soap) can glue the micro fiber surface together, thus reducing its effectiveness. Except: for removing lime scale, limescale remover is recommended to be used in this case. If possible only use a small amount of water on the cloth because, the wetter the cleaning cloth gets, the less amount of dirt it will be able to absorb and hold. After moistening the cloth, squeeze out the cloth well.
When cleaning, do not push the cloth too strongly against the surface, because the microfibers won’t be able to completely “work” properly.
When finished using the cloth, thoroughly wash rinse and squeeze out excess water from cloth, and hang it out to dry. It is sufficient to only use the washing machine, once the cloth has been used several times, or rather if it is strongly contaminated. If you are using a dryer, adjust it to the lowest temperature (50°C). When washing, do not use softener and/or, bleach, because it will make the micro fibers stick to each other.
Be patient, when you start cleaning using the microfiber cloth. The cloth can only project its effects entirely, if all the remains(residues) of cleaning products were previously removed from the surface (especially on stone and window areas). |